Shafts are often forgotten in the game improvement conversation, as they are overshadowed by the work of the clubhead and face. In this post, we change the narrative and address the best golf shafts for irons. I will explain how they impact your launch, ball speed, shot dispersion, and swing speed.
After putting them through their paces and reviewing the data, we had our six best iron shafts for 2022. I have covered all bases, including options for slow, moderate, and fast swing speeds. Plus, you have the best ladies’ and junior’s shafts to look forward to.
On the subject, I have a must-read article for faster swing speeds that you should bookmark for later. Learn the ins and outs of stiff vs extra stiff iron shafts.
What to Look for in an Iron Shaft
Material
Modern golf shafts are constructed from two predominant materials: steel and graphite composite. Steel shafts typically contain extra weight compared to graphite, and you’ll notice that they are more affordable.
Graphite is the go-to material for hybrids, fairway woods, and driver shafts because they prevent additional unnecessary mass. The lighter construction of graphite shafts promotes accelerated swing speed for a powerful strike.
You’ll find that slower swing speed golfers and I enjoy graphite irons shafts because they make it easy to frequently launch your golf ball.
Flex
The flex of your iron shafts impacts their spring leading into impact. A ladies’ flex is the least stiff option and provides maximum whip into the ball at contact. You’ll notice this provides consistent ball speed and a high launch. These shafts work for golfers who swing a 6-iron below 65 mph.
You’ll see that the next flexible option is a seniors flex, built for older golfers and slow-swinging high handicappers. However, most amateurs will fit into the moderate speed bracket and perform best with a regular flex shaft.
Finally, lower handicappers and tour professionals typically register fast and super fast speeds, setting them up for success with a stiff or extra stiff shaft. I have provided a table below highlighting which shaft flex is right for your swing.
Finally, lower handicappers and tour professionals typically register fast and super fast speeds, setting them up for success with a stiff or extra stiff shaft. I have provided a table below to highlight which shaft flex is right for your swing.
Shaft Flex vs Swing Speed
Tour Professional | Low Handicapper | Mid Handicappers | Senior/ High Handicappers | Ladies | |
Swing Speed (6-iron) |
>92 mph | 84 – 91 mph | 75 – 83 mph | 65 – 75 mph | <65 mph |
Shaft Flex | X Stiff | Stiff | Regular | Senior | Ladies |
Weight
The more grams your shaft contains, the harder it becomes to optimize your clubhead speed on the downswing. However, additional mass can prompt some players to activate the necessary muscles to boost power as you transition from the top of your swing to impact.
Powerful golfers with faster swing speeds find that heavy golf shafts enhance stability to deliver a controlled launch. Conversely, slower golf swingers may struggle to transfer sufficient energy to the ball at impact, generating weak launch with minimal distance.
You’ll find that most heavy shafts carry stiff or extra stiff flex, making it ideal for higher swing speeds. On the contrary, lightweight shafts generally offer increased flex to aid slow-swinging players.
Torque
The degree of torque your shafts carry influences the rate of twist during your swing. Therefore, it has the greatest bearing on your shot dispersion. Shafts with a lower torque degree twist less and help golfers to keep their clubface square at contact. Contrarily, a high degree of torque prompts the clubface open at impact, which can produce a slice.
In tests conducted by the TPT Golf, they found that shots with higher torque shafts finished right of the target on most occasions for right-handers. Conversely, lower torque iron shafts delivered a dispersion to the left of the target.
As a result, you should think about a lower torque shaft if your ball finishes right of your target more often than not.
Kick Point
The final factor to consider is the kick point of a shaft which impacts the elevation of your launch. A shaft offers one of three kick points to promote the optimal launch, flight, and carry distance.
The type of kick point your shaft possesses depends on the area that contorts the heaviest during your swing. A high kick point is present near the grip and produces a low launching shot, welcomed by higher swing speeds.
A mid-kick point appears in the middle of the shaft and is built to propel a neutral launch which suits average swing speeds. Lastly, a low kick point features near the club head and bends hard into impact, generating a towering launch for slower swing speeds.
If you are concerned that you are launching the ball too low, try shafts with a lower kick point. Conversely, players afraid of ballooning shots should consider a high to mid-design.
7 Best Golf Shafts for Irons
UST Mamiya Recoil 460 ESX – Best For Moderate Swing Speed
The UST Mamiya Recoil are ideal graphite shafts for amateur golfers with a moderate swing speed, ranging from 80 to 95 mph. Engineers constructed the 460 ESX shaft with regular flex to boost energy transfer at impact.
I found that Recoil Technology is the star feature of the shaft because it encouraged increased spring in the walls of the shaft. This boosted the energy transfer from the clubface to the golf ball at contact, prompting accelerated ball speed for maximum distance.
You’ll find that the rapid velocity and controlled spin prompts a moderate to high launch for consistent carry distance with your iron golf clubs. Finally, UST Mamiya suggests that the 460 ESX contains 4.7 degrees of torque, leading to increased flex during your swing, which can produce erratic results.
Pros
- Promotes rapid ball speed
- Greater spring in the walls of the shaft
- Suits average swing speeds
- Promotes high ball flight
- Encourages optimal carry distance
Cons
- Expensive
- It doesn’t suit faster swing speeds
KBS TGI Tour – Best For Seniors
The KBS TGI Tour shafts with a senior flex profile are graphite constructions designed to give older players greater control on the golf course. The engineers worked to reduce spin and launch for greater distance in your mid and long irons.
I noticed that the 60-gram construction was light enough to boost club head speed, and the mid to low kick point delivered ample height on my shots. In addition, the similarity in play to a steel iron shaft provides superior control compared to other graphite designs.
Furthermore, you’ll find that the KBS TGI Tour features a mid to low kick point, which prompts ample height for improved distance consistency. Lastly, only golfers with a 6-iron swing speed should think about these shafts.
Pros
- Mid to high launch
- Encourages increased club head speed
- Produces consistent distance
- Specifically constructed for seniors
- Moderately priced
Cons
- Expensive
- It’s too flexible for moderate swing speeds
True Temper Dynamic Gold AMT S300 – Best For Fast Swing Speeds
Amateurs who swing a 6-iron between 84 and 91 mph are considered faster swingers and are best fitted to stiff shafts. The True Temper New Dynamic Gold S300 are steel shafts that offer limited flex and high kick point for a low launch.
The reduced flex of the shaft enhances the stability of the clubhead into impact, ensuring low spin to send your ball along a piercing trajectory. You’ll find that this encourages optimal roll once your golf ball touches down.
Finally, True Temper suggests that the Dynamic Gold AMT S300 works for experienced players with a moderate tempo.
Pros
- Promotes a low trajectory
- Lowers spin
- Boosts ball speed
- Suits faster swingers with a moderate tempo
- Affordable
Cons
- The stiff flex may cause some players to produce low trajectory
- The increased mass may slow your swing speed down
True Temper Project X Rifle 6.0 .355 – Best For Low Handicappers and Professionals
Low handicappers and professionals with faster swing speed will appreciate the extra stiff construction of the True Temper Project X Rifle 6.0 .355 shaft. True Temper built these for the players who generate over 92 mph of clubhead speed with a 6-iron.
The Stepless Design Technology (SDT) was my highlight because it ensured optimal energy transfer at contact. I found this produced rampant velocity and optimal length. In addition, I found that the technology prompted a solid feel when the clubface struck the golf ball.
Furthermore, you’ll see that shots with these high kick point iron shafts encourage a flat, penetrating ball flight for improved control and increased roll. Lastly, these shafts control spin for optimal flight, length, and roll.
Pros
- Moderately affordable
- Penetrating ball flight
- Limited flex at impact
- Increased roll
- Low spin
Cons
- The low launch can lead to inconsistent results for slower swingers
- The heavier design causes you to lose clubhead speed
Mitsubishi MMT 50 – Best Golf Shaft For Ladies
The Mitsubishi MMT 50 is our top ladies shaft flex which offers a lightweight construction that encourages rapid swing speed and consistent results. You’ll find that Mitsubishi developed this shaft for those players who swing a 6-iron below 65 mph.
I noticed that the MMT 50 was crafted using metal mesh material. In addition, the engineers took it a step further to include Metal Mesh Technology. The technology elevates the density and stability despite the shaft possessing 5.9-degrees of torque, which leads to increased twisting during your swing.
Furthermore, I enjoyed a mid-to-high launch, brought about by the mid-to-low kick point. This made it easy to launch my shots and ensure ample carry distance. Overall, it is a suitable iron shaft for slower swing speeds.
Pros
- Lightweight and easy to swing
- Prompts a mid to high launch
- Offers an improved feel
- Amplifies acoustics
- Optimal spring into impact for accelerated ball speed
Cons
- Expensive compared to steel shafts
- The lighter design can cause some players to balloon shots
KBS 560 – Best For Juniors
We have covered every type of golfer except for the little guys and girls. The KBS 500 is ideal for your youngster to produce consistent distance and accuracy with the irons. These shafts are specially constructed for youngsters in the development phase of their golf careers.
The engineers developed the KBS 560 with two flex options, including regular-stiff and regular, to cater to all junior swing types. You’ll notice that these shafts are moderately heavier than standard junior shafts, as they are built to operate with adult clubheads.
In addition, the increased mass trains youngsters to swing an adult club. Plus, the KBS 560 golf shaft encourages controlled flight to prevent ballooning shots and losing yards. Finally, these models promote rapid ball speed for optimal yardage.
Pros
- They help juniors transition to adult clubs
- Delivers a controlled launch
- Prompts accelerated ball velocity
- Encourages maximum distance
- They work with adult clubheads
Cons
- The stiffness of the shaft may prove excessive for some juniors to launch
- The low launch may lead slower swinging juniors to lose carry distance
Fujikura Pro Series 95i – Best Graphite Iron Shafts
The Fujikura Pro Series 95i is my top pick for the best graphite iron shafts, thanks to the selection of flex profiles, durability, and glare-resistant finish. Fujikura offers the Pro Series 95i in three flex options, regular, stiff, and extra stiff, making them ideal for moderate to fast swing speeds.
Besides the flex options, these shafts are built to deliver medium spin and launch. As a result, they deliver controlled ball flight on approach.
Furthermore, the engineers created them to allow for a hard or soft step. For example, a hard step represents placing a 7-iron iron shaft in a 6-iron head. Conversely, a soft step requires setting a 6-iron shaft in a 7-iron clubhead.
The use of High-Density Composite Core (HDCC) enhances the shaft’s durability, and it lightens the mass to promote rapid club speed. When you combine a rampant clubhead with a medium launch, you produce a controlled shot with optimal distance and spin.
Lastly, the HDCC material works wonders for feedback, as it eliminates unwanted vibrations that run up the shaft on off-center strikes. Therefore, it protects your hands for a smooth, pleasant feel.
Pros
- Soft feel
- Light construction encourages accelerated clubhead speed
- Customizable for a hard or soft step procedure
- Affordable per unit for graphite shafts
- Built for moderate to fast swing speed
Cons
- The shafts do not suit slower swing speeds
- They are still more expensive than steel shafts