Many amateur golfers are using a putter that is the incorrect length. When you purchase a putter from the shelves of a golf store, it is likely 34 or 35 inches.

However, putter length may need to be customized depending on your height, putting stroke style, and arm length.

Let’s take a look at how you can easily and accurately measure the length of a putter and how to make sure it is the right option for your height.

Does Putter Length Matter?

Putter length will determine the accuracy of your posture as well as the swing arc. Without the proper putter length, you will find that your putts are very inconsistent.

Swing Arc

When you have the correct length putter, the center of the putter sits flat on the ground. When a putter is too long, the heel of the putter rests on the ground with the toe of the putter up in the air. For putters that are too short, you will notice the toe being down on the ground while the heel could be up in the air.

When you have the putter setup, and it’s not flat on the ground, expect it to impact the way you swing the club back. Some golfers will notice the putter comes more inside or outside based on the way the putter sits at setup.

Posture

The posture of a golfer is very important when putting. One of the major checkpoints in a perfect putting stroke is ensuring that your eyes are over the golf ball. When eyes are over the golf ball, it becomes possible to properly analyze the target line.

Consistency

For golfers to make consistent putts, they need a putter that is properly fitted to their putting stroke, height, and style. The thing to remember is that there’s quite a bit of precision in a putting stroke, and without the proper putter, accuracy becomes difficult.

How to Measure a Putter’s Length

Measuring the length of the putter does not have to be a big project. However, it’s certainly easier to get a large 48 inch ruler to complete this process.

Step 1: Gather Materials

To properly measure a putter, you will need a flat surface (the floor is fine), a long 48 inch ruler, and your putter.

Step 2: Position The Putter

To get the correct measurement of your putter, you will need to position it with it resting flat on the ground. Some golfers struggle with putters being the wrong length and the heel or toe positioned up or down; however, when you measure, lay the putter flat.

Step 3: Measure

Take your ruler and put it down on the ground at the heel of the putter. From here, you should be able to hold the shaft of the putter as close to the measuring stick as possible. If your putter has a slight angle to it, keep the measuring device close to that angle.

Step 4: Read The Measurement

The putter length is the number that you see at the top of the ruler where the butt end of the putter matches up on the ruler. For most golfers, this is going to be between 33 and 35 inches. Makes sure to measure the putter to the top of the grip and that the center of your putter head is still on the ground.

Most Common Lengths for Putters

The three most common lengths for putters are 33, 34, and 35 inch putters, Each of these is designed for golfers of different heights and players that also have varying arm lengths.

33 Inch Putter

The 33 inch putter is often found in the golf bag of a lady golfer. Most women’s golf sets are sold with a 33 inch putter that is stock and standard. One of the great things about this shorter putter shaft is that you will feel some added control on shorter putts.

Some golfers like to have a bit more bend in their stance when they are putting. They will often get closer to the ball to improve consistency and create a smooth stroke. Even tall players can use a 33 inch putter if they find it to be the right comfort level and consistency.

34 Inch Putter

The 34 inch putter is the standard length putter. Most golfers on the PGA Tour use a 34 inch putter, and almost all options for sale on the market come in a 34 inch version.

One of the great things about a 34 inch putter is that it works for a wide range of players that would consider themselves to be average height.

35 Inch Putter

The 35 inch putter is for golfers that are tall. Most of the time, players that are using this putter are 6’1″ or taller. Belly putters will, of course be longer than these 35 inch putters, but that also brings up the idea of an entirely different type of putting stroke.

If you have a 35 inch putter that does seem to be too long for you, there is always the possibility of cutting it down. With counter balanced putters, you must be careful as to how the decrease in shaft length will impact the feel of the club in your hands.

For those with a premium putter looking to maintain or improve upon performance, taking your putter to a professional to have it fitted is likely the best solution.

Custom Length Putter

The USGA rules of golf are pretty lenient when it comes to putter length. If you find a 30 inch putter or a 37 inch putter is a better fit for you, you will be allowed. As long as your putter falls between 18 and 48 inches, it will be considered legal.

Quick Guide to Figuring Out Which Putter Length is Right for You

To determine the proper putter length, you can go through a custom putter fitting using launch monitors targeted explicitly towards a putting stroke. However, for most golfers, this is a bit more than is necessary to get a general idea of the length of a putter that will give the most success.

For a quick estimate based on your height, you can use the chart below. This will prove our point that the 34 inch putter works quite well for the average height player. If you see that you fall within a ½ inch of the current length of your putter, chances are you are fine to continue using it.

However, when you are off by an inch or more, that may be time to get a putter fitting and have your putter length adjusted. Also, keep in mind that arm length, as well as your typical setup and stance, can play into this decision.

To find out more information about determining the proper putter length by height, check out our full article on putter length by height here.

Brittany Olizarowicz

Britt O has been playing golf since the age of 7. Almost 30 years later, she still loves the game, has played competitively on every level, and spent a good portion of her life as a Class A PGA Professional. Britt currently resides in Savannah, GA, with her husband and two young children.

Source link

Thanks to my erratic driving game, I had to learn the art of drawing and fading shots out of the woods to get back into play. Sometimes, despite your best efforts, your ball flight turns out opposite to your initial intention. As a result, your ball vanishes off its target line. This post is to educate you about what is a double cross in golf?

The aim is to help you identify when it happens and how you can fix it. Those who struggle with other elements of their swings can read our various detailed guides on how to resolve your challenge.

What is a Double Cross in Golf?

In layman’s terms, a double-cross occurs when your golf ball travels in the opposite direction you were aiming.

For example, a tree sits in your line to the green, and the only shot you have is to induce a fade. As a right-handed golfer, you aim to the left of your target, preparing for the left to right-hand shape, but it doesn’t come. Instead, it develops a draw shape and hooks away from your target.

You were aiming left of your target, and you hooked your shot. That means that you are now well beyond the left side of the fairway.

I, unfortunately, endured a double-cross in my last round. My tee shot ended behind a shrub on a par 5, leaving me with the option of hitting a lofted club over the shrub and laying up or fading a fairway wood. Naturally, I opted for the latter option.

I aimed my feet to the left of the target, positioned my open clubface behind the ball, and initiated my backswing. However, my rotation slowed before impact, causing my hands to take the lead and closing my clubface at impact. That led to a snap hook 20-yards in the wrong direction.

A more common scenario for higher handicap players is that you set up for your ball to shape from the left to the right side of the fairway, but you snap hook it left. Since you were aiming left to account for a slice or fade shape, the result is far worse than if you aimed directly at your target.

Causes of a Double Cross

Rotation

Like I described with my experience with the double-cross, it is often caused by lower rotation speed. That leads to your hands moving ahead of the ball and prompts your clubface to close.

As a result, your ball hooks uncontrollably to the left hand side of the course, putting you on the back foot for the remainder of the hole.

It is vital to turn your hips through impact for optimal power and accuracy. Read more about how much hip turn is best for your golf swing in our detailed guide. Understanding these elements will lead to distance and accuracy consistency.

Weight

Those who consistently slice their shots will notice that you often lose your balance at impact and fall back. That is because you struggle to shift your weight forward and leave your body and clubface open at impact.

On the contrary, if your golf shots draw excessively, you may shift your weight too early on your downswing. That closes your body and clubface, causing your ball to hook.

Ball Position

Where you position your ball in your stance can impact the direction it curves. Mark Blackburn from Titleist explains that it is best to place the ball slightly back if you wish to prompt a draw. That position helps you close the angle of your clubface at impact to initiate a right to left curve:

Conversely, Blackburn recommends placing the ball front center in your stance when attempting to fade the ball.

If you place the ball in the incorrect position of your stance, it is difficult to get your clubface to the angle it needs to be at impact. Therefore, you may slice the ball when you had hoped to draw it.

Swing Path

Besides slow hips and the incorrect ball position, your swing path can also cause your golf ball to travel to the opposite side of the course. For example, if your golf swing moves inside-out, you are more likely to prompt a draw than a slice or fade.

Contrarily, an outside-in swing is most likely to produce shots that fade or slice. The bottom line is if you aim right of the target intending to draw the ball but swing outside-in, your ball may slice or fade away from the pin.

In addition, if you set up for a fade by aiming left of your target, but then you produce an inside-out swing, you may hook your ball.

You can learn more about different swings and the types of shots they produce by reading our informative guide.

Clubface At Impact

While your swing, rotation, and ball position may all impact the final result of your shot, your clubface at impact has the final say. When you leave your face open at contact, it results in left to right sidespin, which leads to a slice or a fade.

Inversely, a closed clubface at impact causes increased right to left sidespin, encouraging a draw or hook.

Swing Easy

When golfers swing rapidly and try to smoke their ball, it generally ends in a bad shot. From past experience, I hit double-crosses when I attempted to swing faster than Kyle Berkshire. My advice to the average player is to take it easy and don’t force it.

4 Tips to Fix a Double Cross

1. Rotate Through Impact

The first area you need to work on to eradicate a double-cross from your swing is rotation. Putting the brakes on hip rotation before impact causes your hands to lead the clubhead. That often prompts a closed clubface position and causes you to hook your shot.

Golf coach Alistair Davies provides a simple drill to improve your rotation. Pick up a golf ball and imagine that it is a stone you are trying to skip across a lake. Rotate your body, and release the ball. You will notice how that motion increased your power and accuracy:

Once you have practiced that motion three to five times, take three practice swings. Focus on rotating your hips through impact to propel your clubface along the intended line. As a result, you increase your chance of executing your intended shot shape with added power.

2. Correct Your Weight Position

You can practice inducing a fade by placing your weight on your back foot at address. Once you are over the ball, lift up your front foot, and maintain the weight on your trail leg. That position prompts you to keep your body open through impact, leading to a fade.

Take a few half swings and feel how this position enables you to keep the clubface open at impact, causing your ball to fade.

On the opposing end, lift up your back foot and reposition the mass on your lead leg to prepare for a draw.

Overall, these drills help improve your muscle memory to consistently execute fade and draw shots and avoid the double-cross.

You can learn the best setup for your golf game by reading about employing a proper stance.

3. Correct Your Swing Path

When your club veers off the intended swing path, it is a mission to get your clubface into position at impact. Failure to achieve the desired clubface angle at impact sends the ball traveling in the unintended direction.

When you prepare to strike a draw, you should swing in and out to give yourself the best chance of closing your face at impact.

Instead of repeating myself, you can learn how to execute an inside-out swing by studying my review here. Instead, let me help you with pulling off a fade to put you in the fairway.

A fade or slice is prompted by an open clubface at impact that generates left-to-right sidespin for right-handers. For starters, widen your stance and position the ball in the front center of it. Next, take your club back and out away from your body, then follow an inside path on your downswing.

This angle causes your clubface to cut across the ball and generate sidespin with an open face, resulting in a fade.

4. Fix The Position of Your Clubface at Impact

The angle of your clubface when it strikes the ball determines which direction the ball will travel. By implementing the above steps into your swings, you should see improved ball striking and the position of your clubface at impact.

A drill that I find handy is breaking up your backswing into three parts to ensure that your club is on plane the entire way. Once you hit the top of your backswing, pause for a moment and commence your downswing.

If your club remains off plane after this drill, you need to take it in baby steps. Take a half swing, pause, and focus on swinging inside for a fade and outside for a draw. Familiarizing yourself with the club’s position at that point of the swing helps you improve your consistency and avoid double cross shots in golf.

Matt Stevens

Matt Callcott-Stevens started playing golf at the age of 4 when Rory Sabattini’s father put a 7-iron and putter in his hand. He has experienced all the highs and lows the game can throw at you and has now settled down as a professional golf writer. He holds a Postgraduate in Sports Marketing and has played golf for 28 years.

Source link